How do I select a color?
Simply send us a message or call toll free 877-470-3757 9-5 EST Mon-Fri right after the purchase with your color selection. Color choices are described in product description

Custom Covers:
Our premium custom boat covers are made specifically for each model listed. They are patterned and tailored for the specific make, model, and year of the boat. Designed for storing, mooring, and trailering. For Mooring additional accessories are recommended such as: Suction cup tie downs or sand bag kit.The best-fitting covers available. When purchasing a custom boat cover, you will need to know the exact Make, Model and Year of your boat. All custom fit covers are aftermarket covers and might be different from original OEM cover.
Custom fit covers have sewn in vinyl reinforcements at stress points.
Custom fit covers have draw rope in the hem to tie down your cover. (Tie down loops are sewn in every 2-3' around the bottom of the cover.)
Please Note: Any after-market accessory that has been installed on your boat may influence the way the cover fits. Please check the cover title & description to ensure the custom cover will work for your boat. If you have any questions, please contact us through messages or by phone 877-470-3757 Mon-Fri 9am-5pm EST.
Do not select a boat cover unless the description exactly matches the year, make, model and any additional description of your boat .Unless otherwise stated, boat covers will not fit modified boats with aftermarket accessories or boats with t-tops, ski/wakeboard towers, extended swim platforms, radar arches, ski poles. If you have some doubt, please contact us prior to purchase.


PLEASE READ BELOW TO MAKE SURE THAT YOU WILL BE ORDERING THE CORRECT PRODUCTS:
Any after-market accessory that has been installed on your boat, may influence the way the cover fits. Below are the most common add-ons. If you have any aftermarket or optional accessories on the boat, please contact us prior to purchase:

Wakeboard Towers:
If you boat is equipped with Wakeboard or Ski Tower, please contact us prior to purchase. Please specify if you have an Original or Aftermarket tower. The picture of the tower will be needed to determine which cover will fit better.

T-Tops
If you Boat is equipped with T-Top, regular boat covers will not accommodate it. Pease contact us prior to purchase. You will need to purchase a special cover to accommodate boat with T-Top. Please take a look at T-Top Boat covers section in our store or simply contact us for details.

Boats with Bimini Tops
Our boat covers will go over most bimini tops that can collapse and lay flat against the boat. We do not offer covers with cutouts for non-collapsible bimini tops.

Bow Rails:
Some Boats might come with non-standard Bow Rails. If your Boat has bow rails higher than 12” in height, please contact us prior to purchase.

 

Bow Pulpit/Anchor
If your boat is equipped with factory or aftermarket bow pulpits and/or anchor davits, please contact us prior to purchase. WE will need to know the total length of your boat including pulpit to ensure that the cover will accommodate it. To find the best fit, add the length of the bow pulpit or anchor davit to the centerline length when selecting the boat length.
For Example: If a boat has a centerline length of 24 feet. A bow pulpit that measures 2 feet in length is installed on the boat. For the cover to fit properly, the correct centerline length for the boat would now be 26 feet.

 

Extended Swim Platform
There are 2 types of swim platforms: Extended and Integrated. Extended swim platforms are an addition to the boat and usually extend centerline length of the boat by approximately 2’. They are usually removable. To find the best fit, add the length of the swim platform to the centerline length when selecting the boat length. Please keep in mind that swim platforms aren’t always standard on a boat. Our covers may not fit boats with teak swim platforms. Please contact us prior to purchase.
Integrated swim platforms are a part of the boat and can not be removed (if needed) and are usually accounted into the overall length of the boat
For Example: A boat has a centerline length of 20 feet. An extended swim platform that measures 2 feet in length is installed on the boat. For the cover to fit properly, the correct centerline length for the boat would now be 22 feet. If the boat in example below has integrated swim platform. The centerline of the boat should still be 20 feet.
Please check the title of the item. If the cover is designed to accommodate a swim platform, it will be mentioned in the title. Please contact us prior to purchase to ensure that the cover will accommodate it.

 

Jack Plate
If the cover is designed to accommodate Jack Plate, it will be mentioned in the title. Please contact us prior to purchase to ensure that the cover will accommodate it. We will need to know the centerline length of the boat including jack plate. To find the best fit, add the length of the jack plate to the centerline length when selecting the boat length.
For Example: A boat has a centerline length of 20 feet. A jack plate that measures 6 inches in length is installed on the boat. For the cover to fit properly, the correct centerline length for the boat would now be 20 feet 6 inches.

Kicker Motor (Secondary Motor)
Please note: Our boat covers are not made to cover kicker motors. However, the cover most likely fit over the kicker motor. If not, you will need to remove the kicker motor while using the cover.

PTM- Electric Trolling Motor
If the cover is designed to accommodate Trolling Motor, it will be mentioned in the title. Please contact us prior to purchase to ensure that the cover will accommodate it. Most of our boat covers will accommodate electric trolling motors as long as the motor is in the stored position with the shaft running parallel to the transom. For styled to fit and flex fit cover, you will need to cover sharp blades of the motor with blanket or towel before applying the cover, or reinforcement kit can be purchased in our store.

Non-Standard Equipment
Some boat manufacturers offer non-standard equipment such as extra tall center consoles, Ski poles, extra high bow rails, extra tall windscreens.etc. Please contact us prior to purchase to check if the cover will still fit

Choose the right cover for your engine!
The cover for an outboard motor (O/B) will typically not fit a boat with (I/O) engine.
The sterndrive cover should be used for both sterndrive (I/O) boats and (I/B) boats.

Is this an OEM cover, same as original cover supplied by boat manufacturer?
This is an aftermarket product. It will not be exactly the same as the original cover. We are not associated with any boat manufacturers and only carry superior quality aftermarket products.

Does the boat cover have snaps?
No. Our covers have shock cords sewn into the hem for a snug fit and loops or buckles sewn into the cover for the tie-down straps.
None of the aftermarket boat covers have snaps. The original snap on cover that snap to the boat are only available from the manufacturer – and usually are not available after the boat design is out of production.

Are the covers designed for mooring, trailering and storage purposes and how are they attaching to the boat?
Our covers can be used for storage, mooring, or trailering!
Custom Fit covers have draw rope in the hem to tie down your cover. Tie down loops sewn into its hem one every 2-3'.
It is recommended that you don't cover the swim step of your boat when mooring, unless you have an integrated swim platform on the boat.
For mooring, we offer optional suction cup tie downs or sand bags kits. Please visit our store.
For storage on a trailer or trailering, loops sewn to the sides of the cover can be utilized with straps. The straps will go down and wrap around the trailer legs. Tie Downs are included with every boat cover. For boats over 22’ in length some extra straps might be needed. Additional straps can be purchased in our store. Tie downs are mandatory for use with our travel covers. Even if you do not plan to travel with your boat cover, the tie downs can provide a convenient way to secure your boat cover.

Why do I need a support pole? A tie down kit?
A support pole is needed to prevent water and/or snow from pooling on your cover.

Does the cover have openings for support poles?
No. If you have support poles already, we suggest cutting a tennis ball or foam pool noodle and placing it over the tip that will be touching the cover.
All Custom fit covers will have a snap installed for a support pole if you will be using a support pole with snap attachment on top.

Are your covers waterproof?
All of our boat covers are highly water resistant, but not 100% waterproof. 100% waterproof covers trap moisture caused by condensation. It need to evaporate to prevent mold and mildew problems. Simply make sure to use a boat cover support pole or similar device to raise the cover up to create an angle for water to escape and water will not seep through and will roll off to the sides. The cover has to be breathable to let moisture to evaporate in order to prevent mold and mildew problems. 100% waterproof covers are not breathable and are not advisable. Even the most expensive material on the market, Sunbrella, is not waterproof. What do you mean by saying that a cover is "breathable"?- This means that all condensation will evaporate and it will prevent mold and mildew issues. This is especially important if you live in a humid areas.

How to measure my boat?
Measure your boat's centerline length (straight measurement from bow to stern) To measure the centerline length, stand inside the boat and run a measuring tape from “tip to tip” (from front to back) through the center of the boat. NOTE: Do not measure up and over the windshield, this is a straight line measurement. Add the length of any installed accessories that should be covered by the boat cover (such as pulpits, jack plates, extended swim platforms) to the centerline length.

Measure your boat's beam (widest point, usually mid-ship). To measure the beam, stand inside the boat and run a measuring tape from the port (left) side to the starboard (right) side at the widest section of your boat

You don't list my boat. How can I get help?
Simply call us too free 877-470-3757 9am-5pm EST Mon-Fri and we will gladly assist and will provide with Ebay item number to purchase.
Send us a message through Ebay messages and we will reply with available options. Please specify year, make and exact model of your boat. Picture of the boat will be helpful as well. Messages are read and responded to every business day (M-F)

I AM NOT SURE ABOUT THE MODEL OF MY BOAT. HOW CAN I FIND OUT THE MODEL OF IT?
Please take a look at the boat registration. There will be a HULL ID listed. You can also find Hull ID number on a top right corner of your boat stern. Please call the manufacturer of your boat and they can tell you the exact model of your boat by checking HULL ID.

If my boat cover doesn't fit, can I return it?
All covers are made at the time of order (MADE TO ORDER) and come with restocking fees. All custom fit covers come with restocking fee specified in the listing.

How long will it take to receive my product?
All custom fit covers are made to order. Production takes 7-10 business days (lead times may increase during peak season) to manufacture, and then your cover will ship to your door via UPS.

I live outside of the continental USA. How do I order if your checkout page doesn’t give me the option?
For customers who live in Canada, Puerto Rico, Alaska, Hawaii, or anywhere else, you must contact customer service by phone or Ebay message prior to your order, we will advise you on shipping costs to your Country. If you are international customer, please contact us locally at 386-283-5955 or simply send us a message through Ebay ask seller a question link. We will advise you in International shipping costs.


Will I be responsible for International customs and duties fees if the package is shipped internationally?
International Customers: All customs duties including: taxes, fees, and all extra charges are the customer's responsibility and will be collected by the carrier upon delivery. Please consult your local customs office before placing a purchase for rates.